21.9 An employer must ensure that a fall-arrest system that is used as a means of fall-protection is erected, installed, assembled, used, handled, stored, adjusted, maintained, repaired, inspected, serviced, tested, cleaned and dismantled in accordance with the manufacturer’s specifications and designed in accordance with the requirements of the latest version of CSA standard CSA Z259.16, “Design of.
(5) Each component of a fall arrest system, including each lifeline, shall be inspected by a competent person prior to each use to determine whether there are any defective, or otherwise unsafe components and if a defect is observed, no person shall use or permit the use of the system until the defective components are replaced or repaired.
(i) the person shall wear a fall arrest system that includes a full body harness, a lanyard and an anchor point and that otherwise complies with Section 8, (ii) a guardrail shall be provided that meets the requirements of Section 9, (iii) a personnel safety net shall be provided that meets the requirements of.
fall arrest system means a system of physical components attached to a person that stops a person during a fall [FPSReg – 3(o)] fall protection means a harness, net, rope, safety belt, structure or other equipment, or device or means of, Nova Scotia. Workplace Health and Safety Regulations , N.S . Reg. 52/2013 Part 21, Fall Protection, Sections 21.1 to 21.4. Section 21.2 Fall protection required 21.2 (1) Except as provided in subsections (3) to (5), fall protection is required if a person is at risk of falling from a work area where the fall distance is, Fall Protection Regulations – Nova Scotia, Guideline No. 21: Working At Heights | Safety Guidelines for the Film …
Fall Protection Regulations – Nova Scotia, Staff are required to have training and follow the fall protection program when working at heights greater than 3 meters (10 feet). This includes work on ladders, scaffolding, elevated work platforms, roofs or any other object that presents a fall hazard.
Fall Protection. The goal of this course is to ensure students know why it is important to have a fall protection procedure in place. This course engages students with a mix of instructor presentations, class discussion and practical demonstrations using fall arrest equipment.
CANADA REGULATION SOR/86-304 Canada Occupational Health and Safety Regulations under the Canada Labour Code Current to: January 3rd, 2007 Note: This is not the official version. The full text and most current version of this regulation is available by visiting the Department of Justice Canada website. Fall -Protection Systems, Fall protection equipment ( fall arrest equipment) manufacturers are regulated by laws, regulations , standards and recommendations promulgated by various national and international bodies. In Canada and the United States the pertinent standard and regulations are: Present Regulations (OSHA) General Industry. OSHA 1910 Standard Scaffold Structures
